Start of Content

Online Catalogue |  Ventus Range

Ventus Range

Ventus 8VL

Ventus 8VL

Price: 2,211.00 (Including VAT at 20%)




Ventus – Latin for “air”– is our line of lightweight tenders. With their low weight to length ratio and balanced design, Ventus boats require very little horsepower to achieve astonishing performance and speeds. They sport a full V-shape hull that runs the entire length of the boat, providing exceptional tracking and stability. Ventus models are the only lightweight boats on the market with an additional air chamber built into the hull. This air chamber makes the Ventus line extremely safe and reliable, while providing a level non-skid floor to keep your cargo and passengers dry. Ventus boats make ideal tenders with plenty of room for carrying crew and provisions.

Overall Length: 8' 6" / 2,60m
Overall Beam: 5' 6" / 1,68m
Inside Length: 5' 10" / 1,79m
Inside Beam: 2’4’’ / 0,72m
Tube Diameter: 16" / 0,40m
Number of Chambers: 3+1
Person Capacity: 4
Weight: 95lbs / 43kg
Recommended HP: 8hp / 6,0kw
Maximum HP: 10hp / 7,5kw
Shaft Length: 15" / 38,1cm
RDC Design Category: C


Standard Equipment

Hand Laid Fiberglass Deep “V” Hull
Stringer System Laminated into Hull
Non-Skid Rubber Floor Panels
Plastic External Transom Plate
Aluminum Internal Transom Plate with Security Lip
Stainless Steel Bow Eye
3 Stainless Steel Davit Lifting Points
Inner Hull Drain with Plug
Deck Condensation Plug
Orca (CSM) Five Layer Coated Fabric
Raised Single Rub Rail
Push Push Plastic Non-Corrosive 2 Stage Inflation Valves
1 Front & 2 Side Orca (CSM) Fabric Handles on Tubes
2 Inside Bow Sets of 2 Orca (CSM) Fabric Handles on Tubes
2 Inside Stern Single Orca (CSM) Fabric Handles on Tubes
Removable Stern Seat
Paddles with Aluminum Shaft
Paddle Holders
Hand Pump
Maintenance Kit
Owner's Manual
Additional Air Retaining Chamber Under the Floor
3 Layers Reinforced Seam

Ventus 9VL

Ventus 9VL

Price: 2,356.00 (Including VAT at 20%)




Ventus – Latin for “air”– is our line of lightweight tenders. With their low weight to length ratio and balanced design, Ventus boats require very little horsepower to achieve astonishing performance and speeds. They sport a full V-shape hull that runs the entire length of the boat, providing exceptional tracking and stability. Ventus models are the only lightweight boats on the market with an additional air chamber built into the hull. This air chamber makes the Ventus line extremely safe and reliable, while providing a level non-skid floor to keep your cargo and passengers dry. Ventus boats make ideal tenders with plenty of room for carrying crew and provisions.

Overall Length: 9' 6" / 2,90m
Overall Beam: 5' 7 " / 1,72m
Inside Length: 6' 9" / 2,06m
Inside Beam: 2' 8" / 0,81m
Tube Diameter: 17" / 0,43m
Number of Chambers: 3+1
Person Capacity: 4
Weight: 106lbs / 48kg
Recommended HP: 9,9hp / 7,4kw
Maximum HP: 15hp / 11,2kw
Shaft Length: 15" / 38,1cm
RDC Design Category: C

Standard Equipment

Hand Laid Fiberglass Deep “V” Hull
Stringer System Laminated into Hull
Non-Skid Rubber Floor Panels
Plastic External Transom Plate
Aluminum Internal Transom Plate with Security Lip
Stainless Steel Bow Eye
3 Stainless Steel Davit Lifting Points
Inner Hull Drain with Plug
Deck Condensation Plug
Orca (CSM) Five Layer Coated Fabric
Raised Single Rub Rail
Push Push Plastic Non-Corrosive 2 Stage Inflation Valves
1 Front & 2 Side Orca (CSM) Fabric Handles on Tubes
2 Inside Bow Sets of 2 Orca (CSM) Fabric Handles on Tubes
2 Inside Stern Single Orca (CSM) Fabric Handles on Tubes
Removable Stern Seat
Paddles with Aluminum Shaft
Paddle Holders
Hand Pump
Maintenance Kit
Owner's Manual
Additional Air Retaining Chamber Under the Floor
3 Layers Reinforced Seam


Ventus 10VL

Ventus 10VL

Price: 2,624.00 (Including VAT at 20%)




Ventus – Latin for “air”– is our line of lightweight tenders. With their low weight to length ratio and balanced design, Ventus boats require very little horsepower to achieve astonishing performance and speeds. They sport a full V-shape hull that runs the entire length of the boat, providing exceptional tracking and stability. Ventus models are the only lightweight boats on the market with an additional air chamber built into the hull. This air chamber makes the Ventus line extremely safe and reliable, while providing a level non-skid floor to keep your cargo and passengers dry. Ventus boats make ideal tenders with plenty of room for carrying crew and provisions.

Overall Length: 10' 6" / 3,19m
Overall Beam: 5' 7" / 1,72m
Inside Length: 7' 7" / 2,31m
Inside Beam: 2' 8" / 0,81m
Tube Diameter: 17" / 0,43m
Number of Chambers: 3+1
Person Capacity: 5
Weight: 123lbs / 56kg
Recommended HP: 15hp / 11,2kw
Maximum HP: 25hp / 18,7kw
Shaft Length: 15" / 38,1cm
RDC Design Category: C

Standard Equipment

Hand Laid Fiberglass Deep “V” Hull
Stringer System Laminated into Hull
Non-Skid Rubber Floor Panels
Plastic External Transom Plate
Aluminum Internal Transom Plate with Security Lip
Stainless Steel Bow Eye
3 Stainless Steel Davit Lifting Points
Inner Hull Drain with Plug
Deck Condensation Plug
Orca (CSM) Five Layer Coated Fabric
Raised Single Rub Rail
Push Push Plastic Non-Corrosive 2 Stage Inflation Valves
1 Front & 2 Side Orca (CSM) Fabric Handles on Tubes
2 Inside Bow Sets of 2 Orca (CSM) Fabric Handles on Tubes
2 Inside Stern Single Orca (CSM) Fabric Handles on Tubes
Removable Stern Seat
Paddles with Aluminum Shaft
Paddle Holders
Hand Pump
Maintenance Kit
Owner's Manual
Additional Air Retaining Chamber Under the Floor
3 Layers Reinforced Seam

Ventus 12VL

Ventus 12VL

Price: 3,034.00 (Including VAT at 20%)




Ventus – Latin for “air”– is our line of lightweight tenders. With their low weight to length ratio and balanced design, Ventus boats require very little horsepower to achieve astonishing performance and speeds. They sport a full V-shape hull that runs the entire length of the boat, providing exceptional tracking and stability. Ventus models are the only lightweight boats on the market with an additional air chamber built into the hull. This air chamber makes the Ventus line extremely safe and reliable, while providing a level non-skid floor to keep your cargo and passengers dry. Ventus boats make ideal tenders with plenty of room for carrying crew and provisions.

Overall Length: 12' / 3,66m
Overall Beam: 5' 10" / 1,77m
Inside Length: 8' 9" / 2,67m
Inside Beam: 2' 9" / 0,84m
Tube Diameter: 18" / 0,46m
Number of Chambers: 3+1
Person Capacity: 6 Weight: 156lbs / 71kg
Recommended HP: 20hp / 14,9kw
Maximum HP: 30hp / 22,4kw
Shaft Length: 15" / 38,1cm
RDC Design Category: C

Standard Equipment

Hand Laid Fiberglass Deep “V” Hull
Stringer System Laminated into Hull
Non-Skid Rubber Floor Panels
Plastic External Transom Plate
Aluminum Internal Transom Plate with Security Lip
Stainless Steel Bow Eye
3 Stainless Steel Davit Lifting Points
Inner Hull Drain with Plug
Deck Condensation Plug
Orca (CSM) Five Layer Coated Fabric
Raised Single Rub Rail
Push Push Plastic Non-Corrosive 2 Stage Inflation Valves
1 Front & 2 Side Orca (CSM) Fabric Handles on Tubes
2 Inside Bow Sets of 2 Orca (CSM) Fabric Handles on Tubes
2 Inside Stern Single Orca (CSM) Fabric Handles on Tubes
Removable Stern Seat
Paddles with Aluminum Shaft
Paddle Holders
Hand Pump
Maintenance Kit
Owner's Manual
Additional Air Retaining Chamber Under the Floor
3 Layers Reinforced Seam


spacer
End of Content